Sysvar.txt

From Project Magenta Wiki

General

sysvar.txt is a file associated to pmSystems which documents and defines a number of offsets and the corresponding variables.

The definition of the variables

Special offset ranges have been reserved for pmSystems operation.

0x5600-0x56FF Internal pmSystems Variables 0x5700-0x57FF Additional pmSystems Variables and User Defined Variables

Conventions

[Offset] [Length] [VariableName] [Factor]

Offset - Any valid FSUIPC Offset Length - 1 for Byte, 2 Word, 4 Dword, .5 bit 5 (from 0) VariableName - One single word, no limit in length (sensibly less than 255 characters Factor - Factor to be applied to the offset value 10 would increase by 10, 0.1 decrease to a tenth

Example

5600 .0 APUMasterFault
5600 .1 APUStartAvail
5600 .2 APUFlap 
5600 .3 APUMaint
5600 .3 APUStarter
5600 .4 APULowPress
5600 .5 APUPumpFault
5600 .6 APUFault
5600 .7 APUGenBus

5601 .0 APUMasterOn

5602 2 APUN .1
5604 2 APUEGT .1
5606 2 APUGenHz 
5608 2 APUGenVolt .1
560A 2 APUBleedPSI

560C .0 APUPump1
560C .1 APUPump2
560E 1 APUMode               /0 0ff, 1 On, 2 Runing,3 Cooling, 4 Shutdown
560F 1 APUStartOn

5610 1 ManEngStart1
5611 1 ManEngStart2
5612 1 ManEngStart3
5613 1 ManEngStart4
5614 1 EngStart
5615 .0 ManEngN11
5615 .1 ManEngN12
5615 .2 ManEngN13
5615 .3 ManEngN14
5615 .4 EngAuto
5615 .5 ConStart
5615 .6 IgnArm1
5615 .7 IgnArm2