Changes to the RJ Glass Cockpit software Important: ========== This is not the full version of the software. Please copy it into an *existing* program folder or run the Setup program first. The Program Setups can be found on www.projectmagenta.com/setup.html Build 88 - terrain display fixed Build 86 - minor technical changes, new DLL Build 84 - corrected F/D bug Build 83 - corrected slip indicator - started implementing additional engine and system modes (internal for the time being) Build 82 - corrected XML flightplan display on western hemisphere Build 80 - FSX XML Flightplan Loading implemented - IAS Smoothing implemented for FSX - FSX APU supported if pmSystems is not running Build 78 - some changes for 4 engine props - started adding pmSystems interface code - changed VNAV altitude display handling Build 77 - added switch to enable/disable com1/com2 display (menu and ini file) - radio altimeter background set - added COM2 frequency display - added VOR1 and 2 standby frequency display - changed message handling and added some messages Build 76 - new DLL and release Build 75 - 4F4 value 54 added, toggle TCAS display OFF/ALT - small bugfixes, new DLL Build 74 - release version Build 73 - (b) prop RPM% was off by factor 100 - added TCASII display and sounds (pmSounds 55j) Build 72 - Smoothed out LOC and GS indications Build 71 - pressing T will change the lower display in the ND from FUEL to CONTROLS, which will show trim and surfaces - Cabin Climb and the other values on the left will become active once something is implemented for it in pmSystems - corrected EGT/ITT text display choice - changed turboprop rpm and % display - dampened a couple of variables Build 70 - smaller graphics changes - added speed trend vector - changed display of radar sweep - new DLL Build 68 - surrond horizon and surrond lines was not saved properly - ITT revisited Build 66 - correction of VOR being displayed with the G/S indicators Build 64 - updated DLL Build 63 - implemented separate copilot ND and PFD modes (via MCP) Build 61 - (c) stop statement upon opengl error removed - (b) "black circle in horizon" issue addressed Build 60 - release to normal versions - smoothed out ITT/EGT - props can display PROP RPM instead of % (press Esc and set it in the menu) Build 55 - (e) added markers and some other information in the AI - (e) re-worked standby gauge - (c) frame selection was not being saved - (c) added brightness control to menu and ini file (for horizon and speed/alt) - (a) changed G/S display - enabled and implemented crosshair flight director (shift-a or FD=cross) - corrected horizon display at high angles Build 53 - fixed FS F/D handling - changed display of torque (softened) - new DLL Build 52 - removed stop statement from weather generation - added tilt display - handling 42X values for offset 4F4 - small graphics changes Build 50 - (b) CDU switch LBS/KGS fixed - (b) added menu and ini option to show/hide radar sweep - essentially 49(d) re-compiled Build 49 - (d) changed positioning on all pages, Alt-Cursor Keys is ND, Shift-Cursor Keys is Engine page - (d) corrected AI display for high pitch values - (d) positioned seatbelts and no smoking sign on Engine page - (d) added support for bits 0, 1, 20 and 21 (DH and Range) in offset 0x5418 (MCP-less operation) - (c) enabled center fuel tank code - (b) added bitmap smoothing option (for the new frame) - (b) changed menu appearance slightly (Esc key) - (b) added code for pmGetWeather and SA_WXR - added new RJ bitmaps (included in the EXE), can be enabled with BackSpace key or via the Menu Build 48 - when no MCP is running, the FS flight director offsets are used - Elec information linked to FS avionics switch Build 46 - DLL update as a fix for data reading problem (TCAS-related) - fuel display of more than 10000 works now. Build 45 - slow startup of displays when electrical power is applied (reacts to pmSystems) - disabled things that were still showing when elec power was off Build 40 - general version update October 20th 2004 Build 36 - fuel used is reset to 0 when the situation is re-set - frames around standby horizon and radio panel can be toggled - negative oil temperatures accounted for (was displaying high values) - solid state gyro connection (test) Build 34 - minor changes - new splash - new DLL Build 33 - corrected problem with ND ranges being inconsistent - corrected MCP-less behavious Build 32 - (b) added UseEGT=On/Off (instead of ITT) - (b) added RPMFactor for Turboprops - both values can be used in the aircraft configuration files as well - engines 3 and 4 supported for jets and turboprops - Windows ME Fix - menu is activated with Ctrl-M again - menu can be re-positioned via Cursor keys and resized with + and - - menu can be right-click dragged Build 31 - F6 page ND is controlled with Alt-Cursor Keys and Engines with Shift-Alt Cusror keys - bits for captain ND supported also without the MCP running - added turboprop gauges and (preliminary) support for three and four engines - some graphics "housecleaning" Build 30 - Enabled KG and LBS switch - Traces FS flight plan loading Build 29 - dimmed terrain display - F7 page is PFD and EICAS - F8 page is ND and EICAS - background grey component can be controlled with Z and X - ctrl-shift-r resets element positions Build 28 - forgot to add V/S text indications Build 27 - added option to display Autopilot information in cyan instead of magenta - enabled terrain display (please check www.projectmagenta.com/docs.html for the files) - added flap settings, will need special configuration files for various aircraft types, please check www.projectmagenta.com/docs