Changes to the Boeing Glass Cockpit software Important: ========== This is not the full version of the software. Please copy it into an *existing* program folder or run the Setup program first. The Program Setups can be found on www.projectmagenta.com/setup.html Build 112 - release version Build 111 - black panel fuel flow gauge corrected (positioning error) Build 108 - changed handling of slip indicator - added single-tank fuel gauge for helicopters - corrected display problem with helicopter torque Build 104 - added re-set command for displays, Ctrl-Shift-R in addition to Ctrl-R Build 102 - corrected problem with corruption of gaifr.set file (bitmap displacement) Build 99 - corrected fuel flow display (1 and 2) - changed dll for FSX navigation handling Build 99 - corrected small bug in DLL Build 98 - corrected local nav math errors (reflected in ADF handling) - changed com frequency max to 128.75 MHz Build 96 - release version - Smoothed out LOC and GS indications - (a) changed RPM for turboprops (removed RPM scaling) - (a) dampened and re-scaled engine temperature - changed menu around a bit - when IAS is selected, it replaces the TAS indication - changed shadows around - IAS can be set down to 140 kts (black panel) Build 92 - correction of VOR being displayed with the G/S indicators Build 91 - added glass horizon to black panel Build 90 - release compile Build 89 - (a) added option to set FS QNH - (a) removed glitch with menu click - (a) ctrl-shift-r resets menu position - (b) very small change to altimeter handling (no immediate value) Build 88 - added baron speed indicator to black panel - re-did RPM gauge for the Black and Archer panel (new bitmaps) Build 87 - (e) added CHTFactor and EGTFactor to configuration file - (e) added small GPS indication for the time being - (e) GPS: now added HSI deflection to reflect the cross track error (scalled to 8000 meters) further comments about GPS handling appreciated - (d) added handling of Ampere Meter (with negative value when ALT off) to all panels - added Ctrl-G to lock VOR1 to FS2004 GPS... Build 85 - added triangle at top of cessna panel - (b) old horizon ring fixed (Black Panel) - added twin horizon display in Black Panel - new black bitmap graphics - added flap, trim and Altimeter display (press Ctrl-R to reset) - smaller bugfixes - new DLL Build 84 - added manifold pressure factor to aircraft config file Build 83 - fixed manifold display for single engine - removed STOP statement Build 82 - INI file is now self-documenting - added Manifold Pressure Gauges for Black Panel (requires new Bitmap file!) - added keyboard commands R - enables/disables radio stack (where available) 4 - sets timer mode 5 - starts/stops timer 6 - resets timer Build 81 - fixed problem with black bitmap when selected from the initial menu - changed scissor mode for black panel horizon Build 80 - Fuel flow problem with some flight models fixed - new DLL Build 79 - bug with LOC corrected (rewrote HSI handling code) - Km/H switch added for Black Panel Build 78 - changed loc/obs handling in DLL using FS nav maths - please make sure you are using the most current navdata if you are using the local nav maths for ILS Build 77 - added twin flight director - corrected horizon bar adjustment within panel (still looking into value from FS) Build 76 - corrected problem where avionics were switched on at the same time as the battery - supports helicopter rotor and turbine RPM (tested with default Bell) as well as Torque needs FSUIPC 3.22 or later (released May 7th 2004) - preparations for changes to Ctrl-B panel - updated dll Build 75 - the program now saves *individual* configuration files for each aircraft type you select in FS - you can set the type of panel, fuel flow factor, rpm factor etc... - for the "black" panel, intrument positions are saved per aircraft type - the engine run time is stored per aircraft type - fuel flow needle slowed down Build 74 - seneca engine 1 rpm corrected (large negative n1 value) - engine shutdown problem resolved (had to do with fuel selectors) - manifold pressure needle slowed down Build 73 - GL error corrected - cessna a/p - problem with twin menu fixed Build 71 (twin) - fixed left/right generator and fuel pumps - adjusted RPM and fuel flow Build 70 - Release of Twin Panel (activate via Menu or Ctrl-D) - new DLL Build 68 - (b) small fix for "black" gauges - reads attitude indicator bar offset from FS - reads ADF heading selector - new DLL Build 67 - menu can be called up with the Esc key as well - fixed utterly wrong speed indication with the Cessna Panel (11 kts off) Build 66 - new "black" bitmap - enabled second engine gauges - small font corrections - check out "font smoothing via polygons" now... Build 65 - added whiskey compass value - maximum airspeed can be set in the options or INI file (MaxSpeed) to allow for high performance aircraft Build 63(b) - Cessna HSI knob works now - on indications for COM and VOR added - fixed small problem with ADF getting disabled - VOR2 should work with all FS panels now Build 62 - much faster loading of bitmaps - new "Black" bitmap and added instrumenrs - zoom "black" instruments with numeric keypad + and - Build 61 - more Cessna changes to the Avionics stack Build 60 - more updates on the cessna panel - corrected display of ADF/VOR selection Build 58 - panel lighting changed with shift-z and shift-z - Cessna-Type panel added ... enable it with Ctrl-C (bitmap needs to be downloaded from www.projectmagenta.com/updates.html) Ctrl-A Piper Archer Panel Ctrl-B Gauges Only (Black Background) Ctel-C Cessna Panel Build 57 - nav lights dimmer can be controlled via Z and X keys, ctrl-x changes the warmth of the colour to red Build 56 - fixed small problem when O and then P is pressed - some minor cleanup - released "Gauges Only" Beta support (feedback welcome) * use the gaifrb.zip file... it should include gaifrb.img... full version of GAIFR required * Press Ctrl-B to enable this mode (Ctrl-A to revert to the normal display) * move instruments by right-clicking on the instrument you want to move, keeping the mouse button down Build 55 - position map zoomable (numpad + and -) - some smaller bugfixes - new bitmap (please download from www.projectmagenta.com/updates.html) Build 52 - smapp corrections, prep for Cessna Build 51 - new bitmap - added G/S to HSI mode - buttons can be removed - use of FS vs local navs wasn't saved Build 50(b) - fixed problem with French Language setting in Win (b) - something must have gone wrong with the 49b compile, re-compiled Build 49(b) - IAS/TAS can be set in the menu - H enables RMI, Ctrl-H swaps V/S position - fuel pump was not displaying properlu - cone of silence was a *bit* too wide - Mixture and Throttle mouseable - glitch with carb heat fixed - gear can be hidden (via options menu) - trim key inverted - forgot mouseclick for NAV - flap mouseable - carb heat not displayed if unavailable in fs Build 48 - HSI implemented - RMI and VS can be swapped - added keys for [G]ear, NumKeypad 7 and 1 Trim, 9 and 3 flaps (3 notches) - option for gear - option for horizon ring - cone of silence Build 47 - added standby instruments - added separate dme channel - fuel selector enabled - added gyro offset from FS - reading selected altimeter pressure - alternator/ampere handling - graphics changes to artificial horizon - added RMI - frequencies weren't being read when not in sim maths mode - many other changes Build 46 - changed menus - added switch to select either own nav maths or use FS information (except G/S) - changed operation of magnetos - fuel pump/pressure simulation - timer runs only with an RPM of 500 or more